Posted: Sun Oct 26, 2008 8:05 am
I'm glad you solved your problem! 
Page 2 of 2
Posted: Mon Oct 27, 2008 2:49 am
Today, in between splitting firewood, I started her up several times to hear her purr just because.
Posted: Mon Oct 27, 2008 4:23 am
I can understand that!
Posted: Mon Oct 27, 2008 5:37 am
Congratulations David! Obviously, knowing the reputation of the rebuilder will go a long way in our level of trust when it comes to rebuilt components! Glad you're up and running again!
Gary
Gary
Posted: Tue Oct 28, 2008 10:25 am
Thanks everbody for the help and support
Posted: Tue Oct 28, 2008 2:14 pm
Distributors seem to be one of the worst components in which to find this type of issues. We've had all sorts of things to come up resulting from bad or misassembled units. Bought 6 new ones a couple of years ago only to find the shaft bushings had been reamed too large. Had to tear every one down to install & ream to size new bushings. Had some with a run of bad coils also, they would last only a few hours until the coil case would split from top to bottom, looked as if they had water in them, had frozen & cracked open.
Posted: Wed Oct 29, 2008 5:03 am
Congratulations, and thanks for posting the final "fix".
Posted: Sat Nov 01, 2008 5:36 pm
Ugly, does that sound like on the G838 site?????? Aparently there are a lot of govt ovhd destributors for the M151 where the shaft is 180 deg out.
Coulda Been Worse
Posted: Sun Nov 02, 2008 5:51 am
25 hours ani't too bad considering............
Congrats,
Congrats,