Cab Top Help

Post by **T. Highway** » Fri Sep 18, 2009 12:39 pm

I put the soft top on my M37 last night and can't seem to get the front/windshield edge to stay put.
The canvas top has the rope bead in it but I think the rim at the top of the windshield is too wide. Is there another part missing or do I have to crimp down that lip slightly?

m-37Bruce · Post by **m-37Bruce** » Fri Sep 18, 2009 3:46 pm

It should be very, very snug? I'd be real careful closing the gap in the windscreen!

greencom · Post by **greencom** » Sun Sep 20, 2009 8:03 pm

The channel in my windshield frame was opened a bit too much and the bead kept popping out at the ends. I used a block of wood and a hammer to close it up a bit until it was snug.
Greencom

Post by **Cal_Gary** » Mon Sep 21, 2009 5:54 am

Mine was mashed nearly flat. After opening it back up I bought a 6 foot long, 3/8 steel rod, inserted it all the way from side to side, then re-sized the channel-perfect fit!
Gary

Post by **T. Highway** » Tue Sep 22, 2009 3:25 am

I used a "C" clamp and a block of wood last night to close up the gap. I will reinstall the top tonite.

Cab Top Help

Cab Top Help

Snug