Aberdeen show.

Nickathome · Post by **Nickathome** » Tue Apr 28, 2009 8:20 am

getting pumped for the Aberdeen show. Less than 3 weeks away now. Anyone else going?

refit1701 · Post by **refit1701** » Tue Apr 28, 2009 9:18 am

w00T! I will be there beginning Thursday AM through Saturday, unless it's a bust and we leave early (not likely).

I have reserved spaces L3 and M3 in the Red section, I have a few things to bring and so do my two buddies.

I have bed side panels available, but won't bring them unless someone expresses an interest. I have a few misc. M37 parts and some Carb. rebuild sheets available.

I'm all revved up to go!

I've got to find you guys this time...last year I didn't meet anyone except GeraldO while I was there.

CGarbee · Post by **CGarbee** » Tue Apr 28, 2009 9:51 am

I am in spaces Yellow T9/U5 (same as last year).
David Doyle will be in space Yellow U6, located beside me..

I'll have an assortment of parts. Electrical, steering, body, etc.

I'm arriving on Thursday with the East Coast Convoy, leaving Sunday morning.

Carter · Post by **Carter** » Tue Apr 28, 2009 10:02 am

I've just about got everything ready for the rally, bringing some carbs, water pumps, dist's, tires and wheels, lights and to many other things M37 to go into here.
Talked to Gerald yesterday and he has quite a list of M goodies he is bringing also, should be a good show.

m-37Bruce · Post by **m-37Bruce** » Tue Apr 28, 2009 1:13 pm

refit1701 wrote:w00T! I will be there beginning Thursday AM through Saturday, unless it's a bust and we leave early (not likely).

I have reserved spaces L3 and M3 in the Red section, I have a few things to bring and so do my two buddies.

I have bed side panels available, but won't bring them unless someone expresses an interest. I have a few misc. M37 parts and some Carb. rebuild sheets available.

I'm all revved up to go!

I've got to find you guys this time...last year I didn't meet anyone except GeraldO while I was there.

Hey John,
I was wondering if you still had that front bed panel for me, if so are you planning on lugging it up there?
I am still planning on attending this year, but not spending the weekend.

refit1701 · Post by **refit1701** » Tue Apr 28, 2009 3:42 pm

I still got it but have utterly failed to get pics of it so far. If I can get pics of it between now and then and we can work something out, I will bring it for you definitely.

m-37Bruce · Post by **m-37Bruce** » Tue Apr 28, 2009 5:29 pm

Looking forward to meeting up w/you!!

flobble · Post by **flobble** » Tue Apr 28, 2009 5:48 pm

I'll be there Saturday with my son. I'll have to meet up with everyone. It's always nice to be able to put faces with names. Let's hope for a nice sunny weekend!

m-37Bruce · Post by **m-37Bruce** » Tue Apr 28, 2009 5:58 pm

Saturday afternoon here as well

m-37Bruce · Post by **m-37Bruce** » Tue Apr 28, 2009 6:00 pm

Saturday afternoon here as well, Cable's or David Doyle's sounds like a winner.
Carter is cooking up something, can I bring some brats buddy ???

GERALDO · Post by **GERALDO** » Tue Apr 28, 2009 6:33 pm

This is LAST CALL ! IF anyone needs any parts let me know , I have a truckload and more! IF you dont tell me what you need I may leave it behind due to space on truck, I will be set up at BLUE J11-K11, will arrive Thursday morning 0630. GERALDO

GERALDO · Post by **GERALDO** » Tue Apr 28, 2009 6:39 pm

Hey Refit, if you have a left side bed pannel that is not rusted out and the braces are straight bring it may be interested if nice. geraldo ( drivers side)

refit1701 · Post by **refit1701** » Wed Apr 29, 2009 1:35 am

GERALDO wrote:Hey Refit, if you have a left side bed pannel that is not rusted out and the braces are straight bring it may be interested if nice. geraldo ( drivers side)

I'll try to get pics of it when I get the ones for Bruce. It's straight and there is a small amount of rust on the flange where it meets the bed floor.

refit1701 · Post by **refit1701** » Wed Apr 29, 2009 1:50 am

Here's a small list of wants, if anyone has this stuff:

2 inspection panels for the doors (my buddy needs two also)

The three brackets which hold the wood for the "headache rack" in the bed.

Passenger seat back and brackets it mounts to

Driver's seat bottom

THINGS I AM PLANNING TO BRING:

Bed crossmembers (very good shape with AF blue on them) -spoken for

Two toolbox doors

Winch leaderchain (from a duce I think)

Various carb service instructions (some copies and originals) Not the ETW1, however.

If I strip my engine of it's 12v system, I might bring that.

And whatever else I can find in the garage. I have a set of pistons but I am not 100% sure what size they are.

Nickathome · Post by **Nickathome** » Wed Apr 29, 2009 2:55 am

Carter wrote:I've just about got everything ready for the rally, bringing some carbs, water pumps, dist's, tires and wheels, lights and to many other things M37 to go into here.
Talked to Gerald yesterday and he has quite a list of M goodies he is bringing also, should be a good show.

Carter;

If your offer is still holding, I may be bringing some of my parts down to sell. I haven't had time to get on the shelf and pull anything down yet, so I will let you know. Thanks.

Aberdeen show.

Aberdeen show.

Front Bed Panel?

10/4

Same

Same

M37 PARTS

BED SIDES

Re: BED SIDES