wtb pto housing empty

TOM R · Post by **TOM R** » Tue Oct 14, 2008 12:16 pm

well the pto we bought was cracked and we finaly took it off to have it repaired but it seems the crack goes halfway around the case through 2 of the pin holes(where it is leaking)

so we were told it is better to get a case so we need a case email me please at thejerk67@comcast.net

TOM R · Post by **TOM R** » Tue Oct 14, 2008 5:42 pm

thanks guys found 1

TOM R · Post by **TOM R** » Fri Oct 31, 2008 11:12 am

well the 2 different ones we were supposed to get cheap both fell through due to cracking anyone got a case we can get cheap? that isn't cracked

TOM R · Post by **TOM R** » Wed Feb 25, 2009 10:14 am

still looking for a pto housing that is inexpensive, everytim i find one it is wrong or cracked, tried welding ours but I don't think it will stop the oil leak on the idler gear pin

xm708 · Post by **xm708** » Thu Feb 26, 2009 10:21 am

Tom

Try george at vermont commercial salvage he had some m37 ptos last I knew. (802) 864-4762

ed

MSeriesRebuild · Post by **MSeriesRebuild** » Thu Feb 26, 2009 3:35 pm

xm708 wrote:Tom

Try george at vermont commercial salvage he had some m37 ptos last I knew. (802) 864-4762

ed

George has pretty much cleaned house, sold out to John at MidWest Mil. He may have some.

powerwagontim · Post by **powerwagontim** » Thu Feb 26, 2009 4:00 pm

George had a couple of PTOs a couple of months ago.
He has gotten rid of a lot of stuff, but I wouldnt call it "cleaned house" quite yet! Still a lot of goodies to be found there.
Tim

Dave A. · Post by **Dave A.** » Thu Feb 26, 2009 4:35 pm

PM sent.

Dave A.

TOM R · Post by **TOM R** » Fri Feb 27, 2009 6:28 am

problem here is I am not gonna spend 250+ for an empty housing dads truck will do without, if I knew what else they fit I could probly goto a junkyard and get 1 for $50

MSeriesRebuild · Post by **MSeriesRebuild** » Fri Feb 27, 2009 9:13 am

TOM R wrote:problem here is I am not gonna spend 250+ for an empty housing dads truck will do without, if I knew what else they fit I could probly goto a junkyard and get 1 for $50

You may have to just let it go then. What the deal is, these PTO's are so in demand, complete units or component parts just won't be cheap unless you find someone who simply doesn't know what he has.

xm708 · Post by **xm708** » Fri Feb 27, 2009 9:15 am

Just to let all know George did not "sell out " to anybody yes he sold a bunch of stuff to John Bizal but I am a close personal freind so please do not think he is cleaned out as others mentioned some people do not know everything..

MSeriesRebuild · Post by **MSeriesRebuild** » Fri Feb 27, 2009 9:28 am

xm708 wrote:Just to let all know George did not "sell out " to anybody yes he sold a bunch of stuff to John Bizal but I am a close personal freind so please do not think he is cleaned out as others mentioned some people do not know everything..

Never have claimed to know it all Ed. I only quoted what George told me at our last contact; which was that "he was pretty much cleaned out." This doesn't mean nor did I intend to say he had nothing at all left. This has been sometime back now, so if he didn't tell me the truth as I can only assume is the case according to you, that is certainly no fault of mine. I was only relaying the message I got from the source himself.

xm708 · Post by **xm708** » Fri Feb 27, 2009 10:30 am

Sounds good charles I think I made my point. And just so you know George usually tells the truth maybe he just did not want to sell you anything ? Just my humble opinion.

MSeriesRebuild · Post by **MSeriesRebuild** » Fri Feb 27, 2009 3:31 pm

xm708 wrote:Sounds good charles I think I made my point. And just so you know George usually tells the truth maybe he just did not want to sell you anything ? Just my humble opinion.

I got it right!! I figured you would come back with that line you love to use on me about "he just didn't want to do business." The truth about that is I've had nothing but favorable dealings with George every time I purchased from him over many years. I can't say a bad thing about him, we have been straight up with each other always. Now it ain't no front page news that you don't like me & you are certainly one who carries a grudge, I imagine most of the commoners here have figured that out long ago, thus I can speak freely. Actually I have nothing against you, so whatever it is you are holding over my head is your problem, not mine. I'd appreciate it if you would refrain from speaking totally out of line about any vendors dealings with us. Obviously you don't know everything that you think you do. By the way, I know George told me the truth about selling much of his stuff to John, his term about cleaning house was just his way of saying he had sold off a lot of stuff. You on the other hand are being totally untruthful just to satisfy you own selfish desire & support the grudge you carry against us. A saying a close friend of mine uses often should apply to you with this problem you have with me, "get a ladder & get over it." You've carried a grudge long enough. I hope now that we can move on & be civil to each other, I can handle that, can you?

xm708 · Post by **xm708** » Fri Feb 27, 2009 4:28 pm

Charles

It is not worth wasting my time with this. I just intended to support George. I personally could care less about you or your business along with quite a few other people here. Dead subject as far as I am concerned. And yes I can be civil until the need arises to not be civil ?

ed

wtb pto housing empty

wtb pto housing empty

PTO housing

Re: PTO housing

PTO

Re: PTO

pto

Re: pto

pto