List of sold components:
1) brake drums and pads
2) brake hardline and fittings, diff assembly (pending)

Sent you a PM

I'm swapping the stock front out for a D70 I built up. The backlash seems pretty tight, I'd guess that the Selectro hubs were put on there early on. One hub was knocked clean off on the Rubicon trail, but the axle is otherwise complete. Please reply to this thread with any part requests.
Thanks

Sold! That was fast. Thanks all

Is $600 realistic? I'm willing to negotiate

About 20k miles on block, 2500 miles on rebuild lower end, 12 volt, monojet carb. 25 psi oil pressure at hot idle, 60 psi by 1500 rpm.
Looking to sell complete from fan to transmission output flange, air filter to pan. Take it for a test drive before I pull it.

Located in central CA, 93405

I do, and often! It's stock save the 11.00-r16 XL's. The ride is much more friendly than a comparable jeep, even with those thick spring packs.

Ha, remedial training! Which reminds me that when I got this truck, along with many other issues like a thrown rod, hole in the block from said rod, hackjob electrics with all wires in yellow, the fording plug was in the clutch housing, stopping up about a quart of oil. I didn't think much about it ...

Thanks Cal_Gary, I'll crawl underneath and measure mine tonight.

After a tune-up this weekend, my clutch progressed from slipping some of the time to slipping almost all the time. I had the disc out when rebuilding the engine and it looked like it had lots of meat, almost like it was brand new. Clutch pedal free play is good. The local AAMCO transmission guy says...

I have a fuel pressure gauge on the dash that takes its reading right before the carb--it holds steady when the engine is sputterin/bucking as if the fuel level in the carb is low--like I'm running out of gas. I know this ETW1 needs a rebuild, I was just curious if there was a better carb out there ...

I posted this on PowerWagonAdvertiser, thought I'd try here too. My ETW1 wont run while I'm climbing. I've heard there's a Rochester that works much better, which model?

Thanks