Home 
is there is spec or reccomended torque for the 3/8 cap screws bolts that jold on the worm shaft
Bearing retainers? Is 30 ft lbs too much?
Thanks
Torque spec for LU4 Winch Bolts
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
T. Highway
- Moderator
- Posts: 1793
- Joined: Thu Jul 09, 2009 4:57 am
- Location: S.E. Wisconsin, USA, Earth
Re: Torque spec for LU4 Winch Bolts
US recommended torque specs are:
3/8" Coarse thread grade 5 is: 23 lb-ft
3/8" Fine thread Grade 5 is: 26 lb-ft
3/8" Course thread Grade 8 is 33 lb-ft
3/8" Fine thread Grade 8 is 37 lb-ft
Regards,
Bert
3/8" Coarse thread grade 5 is: 23 lb-ft
3/8" Fine thread Grade 5 is: 26 lb-ft
3/8" Course thread Grade 8 is 33 lb-ft
3/8" Fine thread Grade 8 is 37 lb-ft
Regards,
Bert