Letter code, and how to remove oil pressure relief valve
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Letter code, and how to remove oil pressure relief valve
How you remove the oil pressure relief plunger? I have the cap and spring out, plunger won't come out. I tried a magnet, but no luck.
John, in Aiken SC, Where trains run down the center of the parkway
Re: Letter code, and how to remove oil pressure relief valve
Well I got that wrong- ECAAACE is the code, stamped up by #1 bore.
John, in Aiken SC, Where trains run down the center of the parkway
Re: Letter code, and how to remove oil pressure relief valve
I only see two A's. Spray some carb cleaner in the bore on the relief valve, preferably so that it is soaking in it and after a while tap it down just a hair to try to break it loose then try the magnet and hopefully you can start to work it back and forth. Probably frozen in with carbon and old baked oil. Use the carb cleaner to break it loose then some WD40 after that to lube it as you continue to try to move it. WD-40 is also a solvent.
1953 M37
1964 M151A1
1967 M416
1984 M1008
4/1952 M100
12/1952 M100 gone
1964 M151A1
1967 M416
1984 M1008
4/1952 M100
12/1952 M100 gone