g741.org

One Ball & Ball Carb, completely rebuilt and all parts either replaced with NEW or related. Even down to all of the springs and internal parts. Replated carb body to original color. $245+ shipping (no core required). All settings are correct. Done by a professional (Wallace) that retired from the business, done to "as new" and museum quality.

Two NOS vacuum wiper motors for M37. These are black (as they came from the factory), both with the correct Trico numbers in yellow. I have had these for years, and both were stored properly and lubricated, and as a consequence, both work like new (no seals dried out like in most NOS parts). $140 + shipping for the pair. The Wiper Man (Ficken) charges at least $100 to rebuild your old ones.

Two containers of lead crush sealing washers that go under the screws that retain the fuel sending unit to the gas tank. NOS. $20 + shipping for each container.

All will be sent the most economical way (not sure if "cheap" can be used concerning shipping these days!).

PM me if interested. Here are some links to photos of the items:

https://www.dropbox.com/s/xs2ypvcszwg8l ... 4.jpg?dl=0
https://www.dropbox.com/s/8abmfgmtg9r20 ... 4.jpg?dl=0
https://www.dropbox.com/s/clde0moywp1xp ... 4.jpg?dl=0
https://www.dropbox.com/s/ctm5qzavqnxr8 ... 4.jpg?dl=0
https://www.dropbox.com/s/tpo1ff0kvpbe6 ... 4.jpg?dl=0
https://www.dropbox.com/s/jklhfewjhw56t ... 4.jpg?dl=0
https://www.dropbox.com/s/f6q6z3zp9i3ia ... 4.jpg?dl=0
https://www.dropbox.com/s/l6d3lfuctnzs2 ... 4.jpg?dl=0
https://www.dropbox.com/s/18enbmkkbdqf7 ... 4.jpg?dl=0
https://www.dropbox.com/s/8j488citempxs ... 4.jpg?dl=0
https://www.dropbox.com/s/0sou1ums0ahno ... 4.jpg?dl=0
https://www.dropbox.com/s/mfr1yek2vzqxe ... 4.jpg?dl=0

Carb and vacuum motors are sold. Thanks!