farm truck rustoration

just me · Post by **just me** » Tue Dec 06, 2016 10:46 am

PM Sent

NAM VET · Post by **NAM VET** » Wed Dec 07, 2016 3:54 am

what an incredible accomplishment you have achieved, with all the tasteful modifications to make your truck truly one of a kind. I am rather limited in my own abilities, and actually pat myself on my back when I change my oil on one of my vehicles without spilling dirty oil on my driveway. I really like your truck.

52PLOWERWAGON · Post by **52PLOWERWAGON** » Wed Dec 14, 2016 9:29 am

block is back together

cam gear was chewed up replaced with old one and old chain ,new chain from vpw was NOT RIGHT

remember when I thought I had a rod knock ,I bought a KNOCK new old stock from vintage power wagons

52PLOWERWAGON · Post by **52PLOWERWAGON** » Wed Dec 14, 2016 9:45 am

12 volt starter question

if I swap to a civy fly wheel will the 6/12 volt starter perform properly and haven enough reach to have the teeth mesh

and any one wanna buy a 24 volt starter

starter 1 rebuilt, needs switch and to have arm welded $100

starter 2 nos started truck less than 10 times $225

starter 3 nos but starter drive is frozen to armature shaft due to improper storage $200

starter 4 nos never used $250

isaac_alaska · Post by **isaac_alaska** » Wed Dec 14, 2016 2:09 pm

on my 251, i swapped the bell housing, transmission, ring gear, and starter. used the flywheel and clutch from the 251. installed in a civvy power wagon and used the 6v starter on 12V system. so far, it's working good.

52PLOWERWAGON · Post by **52PLOWERWAGON** » Sun Dec 18, 2016 1:17 pm

myth busted
I got civi starter to work with mil flywheel

52PLOWERWAGON · Post by **52PLOWERWAGON** » Sat Dec 31, 2016 2:38 pm

john deere floor mats installed (easiest installation ever

)

and ive got me an air horn installed (for them idiots with disc brakes

)

m-37Bruce · Post by **m-37Bruce** » Sat Dec 31, 2016 8:55 pm

52PLOWERWAGON wrote:john deere floor mats installed (easiest installation ever )

and ive got me an air horn installed (for them idiots with disc brakes )

Any pic's?

52PLOWERWAGON · Post by **52PLOWERWAGON** » Sun Jan 15, 2017 4:59 pm

IT RUNS

IT STARTS WHEN COLD AND WHEN HOT

IT HAS GOOD OIL PRESSURE

IT EVEN ROLLED OUT OF THE SHOP UNDER ITS OWN POWER (first time ever)

AND IT NEEDS A WATER PUMP

but I got one ordered for 33 bucks

and it is good in the snow

very good weekend , I finally got a taste of victory

is going to be licensed in April , I'm gonna have the coolest ride in the county

ashyers · Post by **ashyers** » Sun Jan 15, 2017 6:12 pm

Travis,
Glad to hear you have the M up and running! Hope you have a heater

! Enjoy it!

Andy

W_A_Watson_II · Post by **W_A_Watson_II** » Mon Jan 16, 2017 5:34 am

Travis,

GREAT NEWS! So glad you have success. You will indeed have a great fun ride come spring.

52PLOWERWAGON · Post by **52PLOWERWAGON** » Thu Jan 19, 2017 7:02 am

water pump came from rock auto

isaac_alaska · Post by **isaac_alaska** » Thu Jan 19, 2017 4:29 pm

52PLOWERWAGON wrote:myth busted
I got civi starter to work with mil flywheel

curious what you had to do to make it work (:

RMS · Post by **RMS** » Thu Jan 19, 2017 4:32 pm

isn't it truck vs car not mill vs civi ?

isaac_alaska · Post by **isaac_alaska** » Thu Jan 19, 2017 5:13 pm

RMS wrote:isn't it truck vs car not mill vs civi ?

i put a military 251 in my civilian powerwagon, it was a bit of an undertaking and i had to pull the motor 3 times before i got the right combo of parts

farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration

Re: farm truck rustoration