Page 1 of 1
R U MISSING THE CNTR TAILGATE SPRT BRACKET
Posted: Wed Jun 25, 2014 2:47 pm
by lten1063
Are you missing the center support bracket for your tailgate. Will we are and we found one to look at in person. It is made out of thin tin = weak support. Well I made one for our M37. What do you think?
http://www.surfacezero.com/g503/showpho ... et&cat=500
Later Joe
Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET
Posted: Wed Jun 25, 2014 7:16 pm
by combat32
Joe the pic didn't come thru, email it to me again and I can post it here for you.
Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET
Posted: Wed Jun 25, 2014 9:43 pm
by ZGjethro
I only had the side supports when I built my tailgate. I didn't even know about the center support. My truck had no tailgate when I bought it from the fire department. I welded it up and used a solid cylindrical rod as the hinge and it was full bed width. The rest of the tailgate was welded to the rod and I have no flex at all when I sit on the tailgate when it is down
Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET
Posted: Thu Jun 26, 2014 4:14 am
by T. Highway
Joe,
I modified your image to a URL link, since the photo is hosted on the G503 site.
The bracket looks like it should work just fine.
Bert