g741.org

Tony,
My old log-in failed to work.
Here are the specs on the pitman arm.
Overall length of the arm is 19 cm.
Center of hole to center of hole is 14 cm
the offset of the arm is 6 cm.

Thanks Tom....
I'll hit E-Bay and see what I can turn up plus I'll try a few of the steering shops that convert US vehicles from LHD to RHD, maybe someone has something lurking about there...
Any chance you could E-Mail me a couple of pics of the arm, face and profile maybe?

MM

I'll see what I can do.

MM : I have used a place called Rareparts.com in California to make me up a custom pitman arm for my M37. The arm is to connect to a chevy saginaw power steering box ( reverse rotation) to the stock steering drag link. The arm has a ball stud that is tightened in to maintain the same ball size as the original pitman arm. The ball stud is RP27642. The arm is 7/8" thick and custom bent to the correct shape. It's a little pricey but super strong. Terry

Send me an email at snakeriver4x4@ymail.com and I will send a pic.

Thanks Tom, E-Mail Sent.....

MM