g741.org

Hi

I have been donated a tow hitch )thanks again Joe, a true gent) for my M37 that needs some work. I did know this hence the donation.

Basically the nut that holds the rating attachement to the pintle has some issues with the thread. My first remedy will be to try a tap and die nut. So the question is does anyone know the size and type of thread?

In-between down pours I will get over to the od goddess and check it out for you Paul. Someone might beat me to it.................

Cheers Bruce

That's what happens when having to use a sledge hammer to remove the pintle from the truck. My bad for not putting the nut on and smacking it that way. I'm glad it finially got to you Paul.

Paul, Are we talking about the "Castellated Nut" or one of the four that hold the pad of the swivel?

we are talking about the castellated nut. Its about an inch/30mm across

@ Joe - its not a huge thing to fix so thanks gain for the generous donation to the truck

I believe the Pintle is 1-1/4-12NF threads


Sal

great cheers Sal

Thanks Sal!