Re: Carburettor question
Posted: Thu Mar 29, 2018 6:47 am
This thread must get visited alot!!
My M43 has been a pain with the carb, but i may have just found the issue.
I've set the float level several times, and after a rebuild it will only run with choke.
I have been having lots of flooding before.
Problem I have just found is the main body gasket is different in the rebuild kit (5 main body gaskets, none the same as the old one) and doesn't seal the idle circuit so instead of drawing fuel its drawing fresh air from outside, hence why adjusting the idle screw makes no difference.
I just need the rain to stop to put it back on with the original gasket and seen if my theory is right.
My M43 has been a pain with the carb, but i may have just found the issue.
I've set the float level several times, and after a rebuild it will only run with choke.
I have been having lots of flooding before.
Problem I have just found is the main body gasket is different in the rebuild kit (5 main body gaskets, none the same as the old one) and doesn't seal the idle circuit so instead of drawing fuel its drawing fresh air from outside, hence why adjusting the idle screw makes no difference.
I just need the rain to stop to put it back on with the original gasket and seen if my theory is right.