Page 1 of 1
Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 10, 2011 7:03 am
by Carter
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 10, 2011 7:37 am
by cuz
Hello,
Can you post a photo showing the bottom of the dial face completely?
It is a panel flush mount unit normally found in a electronics panel, radio or test set.
They show up a lot in aircraft old NOS stock where they were commonly used in test sets.
http://www.wbparts.com/rfq/6625-00-384-8509.html
6625-00-384-8509 Request for Quote Plus Technical Data
Manufacturing Part Numbers under this NSN: 10688, 10688A, 4011, 4015-190, 66741, 9717A, A10101, E48468M, K10688, K9717
6625-00-384-8509 Characteristics Data
MRC Criteria Characteristic
AMQY INSTALLATION DESIGN PANEL
APSN (NON-CORE DATA) PANEL FOR WHICH DESIGNED NONMAGNETIC
BHSX (NON-CORE DATA) CIRCUIT CONSTRUCTION TYPE NONELECTRONIC
AMKD INDICATOR TYPE DIAL W/POINTER
BHMW MEASUREMENT RANGE -30.0 TO 30.0 AMPERES, DC SINGLE INDICATOR SINGLE RANGE
APPN ACCURACY IN PERCENT -8.0 TO 8.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
BHDC SCALE GRADUATION TYPE LINEAR SINGLE INDICATOR SINGLE RANGE
ABWG SCALE DIVISION QUANTITY 12 SINGLE INDICATOR SINGLE RANGE
ASSS POINTER COLOR WHITE SINGLE INDICATOR SINGLE RANGE
APMM DIAL SCALE MARKING COLOR WHITE SINGLE INDICATOR SINGLE RANGE
AQFY BACKGROUND COLOR BLACK SINGLE INDICATOR SINGLE RANGE
AQEC MOVEMENT TYPE MOVING COIL, PERMANENT MAGNET
CTQL MOVEMENT SUSPENSION METHOD JEWEL PIVOT BASE
CTTD CIRCUIT ATTACHMENT METHOD AND QUANTITY 2 THREADED STUD
ANTG SENSITIVITY RATING 46.0 MILLIVOLTS
BLSB SCALE SELECTION METHOD TERMINAL
AWZJ POWER SOURCE EXTERNAL
AACT CIRCUIT CURRENT FOR WHICH DESIGNED DC
STYL STYLE DESIGNATOR C1 ROUND FLUSH MTG
APSW METER BODY DIAMETER BEHIND MOUNTING FLANGE 1.954 INCHES MINIMUM AND 2.037 INCHES MAXIMUM
APST METER DEPTH BEHIND MOUNTING FLANGE 0.656 INCHES MINIMUM AND 0.979 INCHES MAXIMUM
ADAV OVERALL DIAMETER 2.625 INCHES MINIMUM AND 2.656 INCHES MAXIMUM
ABHP OVERALL LENGTH 1.479 INCHES NOMINAL
AXHR MOUNTING FACILITY TYPE AND QUANTITY 3 UNTHREADED HOLE
ABTB MOUNTING HOLE DIAMETER 0.144 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
ANRL MOUNTING ARRANGEMENT STYLE E5 THREE HOLE/STUD BOLT CIRCLE
AFFL MOUNTING BOLT CIRCLE DIAMETER 2.374 INCHES NOMINAL
NHCF NUCLEAR HARDNESS CRITICAL FEATURE NONHARDENED
CBBL FEATURES PROVIDED ZERO ADJUSTER
ZZZV III FSC APPLICATION DATA TEST SET, ELECT. EQUIP.
http://www.warbird-parts.com/invent/gauges.html
S-561 Ampmeter, -30 to +30 amps, mfgd. by Chrysler, P/N 1-PT-E-48468-M, brand new $ 35.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 10, 2011 8:23 am
by Carter
Thanks Wes;
APPLICATION DATA TEST SET, ELECT. EQUIP.
Intresting, Clark found them at a scrap yard where they were headed for the shreader and gave the owner $5. for all which was 3 five gallon buckets full of them.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 10, 2011 10:36 am
by cuz
There should be an adjustment opening on the back.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Mon Apr 11, 2011 3:26 am
by Carter
No adjustment opening on the one that I opened, haven't unrapped any of the others.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Mon Apr 11, 2011 11:26 pm
by rixm37
Carter those are pretty cool gauges. THere has to be a story behind them.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Tue Apr 12, 2011 6:43 am
by Carter
A story I'd like to hear other than what I know already which is they came from Mechanicsburg Pa. Naval Ship's Parts Facility in a Property Disposal bid sale years ago. Now I need to figure out what to do with them.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Tue Apr 12, 2011 8:14 am
by cuz
Advertise them on the radio operator's and radio equipment web sites.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Fri Apr 15, 2011 12:07 pm
by Joe
cuz wrote:Advertise them on the radio operator's and radio equipment web sites.
Also on the vintage car and hot rod sites. I'm sure they'd love the logos and Chrysler markings. OR just hit all venues at once by putting them on E-greed.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sat Apr 16, 2011 4:43 am
by Carter
cuz wrote:Advertise them on the radio operator's and radio equipment web sites.
Joe wrote:
Also on the vintage car and hot rod sites. I'm sure they'd love the logos and Chrysler markings. OR just hit all venues at once by putting them on E-greed.
What sites do you guys think would be best as Clark and I would like to sell some of these.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 17, 2011 3:30 am
by Lifer
I wonder where they were made. The backward "C" in Chrysler seems to indicate that they were not made in the U.S. An error like that should have been caught and corrected immediately if they were.
Re: Ammeters, Part # CC- E- 48458-M
Posted: Sun Apr 17, 2011 8:09 am
by cuz
Only one box has the typo backwards "C". And then only on the rubber hand stamped boxes.
