g741.org

Posted: **Sun Mar 22, 2009 6:52 pm**

Hi Guys,
Anyone have a picture of the bottom of the passenger seat base?
I have a set of springs, but I gather the correct base has a plywood base, this is just springs, with some brackets toward the rear. I will try to get a picture of it. It would sure help to have a visual on what I am looking for!
Thanks,
Tim

Posted: **Sun Mar 22, 2009 8:45 pm**

Will dig it out and take some shots of it.

I did take some large butcher paper, spray painted the board-bottom, sent that to buddy who used that as template for accurate replacement.

kevinL

Posted: **Mon Mar 23, 2009 3:29 am**

Thanks Kevin,
I look forward to seeing what I should have!
Tim

Posted: **Mon Mar 23, 2009 5:11 am**

I have the original seat bottom that I kept to use for a template when I cut the plywood I used for the new one. I can make a template for you if need be. Send me a PM with your address if you'd like me to make a paper template .

Posted: **Mon Mar 23, 2009 7:13 pm**

Thanks Nick,
I may take you up on the pattern, I will wait to see a picture of the seat bottom first. I am hoping that the seat frame I have is correct, just missing the plywood. It sure seems to be the right size.
Thanks again,
Tim

Posted: **Tue Mar 24, 2009 5:28 am**

Tim;

No problem. If you find that you need a template made up, just give me a shout.

Posted: **Tue Mar 24, 2009 12:36 pm**

Here's the bottom view, I'll look around, or you can snoop ariund my webshots page yourself, if you like?
[URL=http://news.webshots.com/photo/139 ... .jpg[/img][/url]

Posted: **Tue Mar 24, 2009 12:40 pm**

[URL=http://news.webshots.com/photo/114 ... .jpg[/img][/url]

Posted: **Tue Mar 24, 2009 5:00 pm**

Thanks for the pictures Bruce. Unfortunately they confirm that I do not have a correct seat bottom. Bummer!
Oh well, the thrill of the hunt!
Thanks again, Tim

Posted: **Wed Mar 25, 2009 3:12 am**

The pic doesn't actually confirm that your seat bottom is "incorrect." My 1954 M37 has the original seats/upholstery in it and my seat bottom looks nothing like the one pictured above. I don't have a pic of it handy, or I'd post it for you to look at.

Posted: **Wed Mar 25, 2009 3:33 am**

m-37Bruce wrote:[URL=http://news.webshots.com/photo/114 ... .jpg[/img][/url]

Ahh, so that's what goes there! I wondered what that bracket was for.....Hey where can I get one of those first aid kits?

Posted: **Wed Mar 25, 2009 3:51 am**

I don't even have the bracket....just the two holes. Something else to hunt for....

Posted: **Wed Mar 25, 2009 4:25 am**

John,
There isnt a bracket for the first aid kit. There are 4 rubber bumpers and a canvas strap.
Tim

Posted: **Wed Mar 25, 2009 8:24 am**

Hmm, I'll have to revisit that. I could swear my truck has a bracket that holds something there.

Posted: **Wed Mar 25, 2009 9:37 am**

This was stenciled on the underside of an orig. seat bottom:
http://news.webshots.com/photo/20923428 ... vhost=news

g741.org

Anyone have a picture of a passenger seat?

Anyone have a picture of a passenger seat?

Just happpens I have one...

Seat bottom

seat bottom.

Bottom View

Side View

Re: Side View

First Aid Kit