Pintle Question - Photos Added

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
refit1701
1SG
1SG
Posts: 1003
Joined: Tue Oct 23, 2007 9:38 am
Location: Odenville, Al
Contact:
Contact refit1701

Post by refit1701 »

Hmm... so you have to take the spindle nut off and bolt the large plate to the inside of the rear cross member, thread the shaft through the hole from the outside and put the spindle nut back on?

The grease fitting must face downward then?

I better do all this before I put the bed back on...
-John
Member of Dixie Division MVC

1953 USAF M37 wow, restored
1962 M151 Ford Production, on the rotisserie now
1953 USMC M37 w/w -in storage
1942 M6 Bomb Service Truck (sold to UK collector)
1967 M116A1 Pioneer Trailer
1968 M101A1 Trailer
S-89 Comm box
Top
knattrass
SFC
SFC
Posts: 625
Joined: Fri Jan 04, 2008 7:27 am
Location: Deetriot, MI

Post by knattrass »

Looks to me that the spacer and plate are assembled together per Rick's direction above. How the thing is attached is not clear to me yet either.
Top
Post Reply

Return to “Technical group”