Page 1 of 1

Front Bumper

Posted: Sat Oct 18, 2025 3:50 pm
by JimC
Well, I finally got that unsightly front bumper off the truck.
Gotta bring a winch style lower grill in from the hangar before I install the winch bumperettes. Getting those rusted 70 year old bolts out was a chore.
20251018_151416.jpg
20251018_151416.jpg (120.15 KiB) Viewed 139 times

Re: Front Bumper

Posted: Sat Oct 18, 2025 4:03 pm
by JimC
About fifty years ago one of my friends needed to relocate the truck across the storage yard (I wasn't there).
So he torched a couple of holes in the frame and stick a big U-bolt in to attach the towbar.
It's always kind of bothered me and now that I'm refurbishing the truck, I'm going to repair the rear hole because it is structural.
However, the front hole isn't and my friend departed this earth way too soon, so I'm thinking about leaving that front hole as a historical tribute to him (it isn't structural and can't be seen when the winch and bumperettes are on the truck).

I'm dithering - what would you guys do ?
20251018_151239.jpg
20251018_151239.jpg (166.72 KiB) Viewed 137 times
20251018_142311.jpg
20251018_142311.jpg (137.65 KiB) Viewed 137 times

Re: Front Bumper

Posted: Sat Oct 18, 2025 4:06 pm
by JimC
Got the back wheels off and the rims at the sandblaster.
Looking forward to having all four tires on the truck.
(front bumper is in the picture) :D
20251018_142211.jpg
20251018_142211.jpg (137.17 KiB) Viewed 137 times

Re: Front Bumper

Posted: Sun Oct 19, 2025 12:00 pm
by JimC
"However, the front hole isn't and my friend went west way early, so I'm thinking about leaving that front hole as a historical tribute to him (it isn't structural and can't be seen when the winch and bumperettes are on the truck)."

Sometimes I stick my foot in my mouth. The frame extension rails for the winch slipped my mind. I do have to repair that front hole. But I did get a test fit on the winch bumperettes done today.

Re: Front Bumper

Posted: Sun Oct 19, 2025 12:49 pm
by JimC
"However, the front hole isn't and my friend went west way early, so I'm thinking about leaving that front hole as a historical tribute to him (it isn't structural and can't be seen when the winch and bumperettes are on the truck)."

Sometimes I stick my foot in my mouth. The frame extension rails for the winch slipped my mind. I do have to repair that front hole. But I did get a test fit on the winch bumperettes done today.
1760906811286_Studio_20251019_144519 (1).jpg
1760906811286_Studio_20251019_144519 (1).jpg (62.55 KiB) Viewed 125 times

Re: Front Bumper

Posted: Mon Oct 20, 2025 8:25 am
by just me
I would have fixed it regardless of the frame extensions. Boy, they look really weird with no bumper!

Re: Front Bumper

Posted: Mon Oct 20, 2025 3:31 pm
by JimC
I went out to my hangar today and dug through my parts pile.
Found two new inner windshield frames complete with glass and weatherstripping still in the box.
I'm a happy camper. Still looking for the new outer frame.

Re: Front Bumper

Posted: Mon Oct 20, 2025 10:49 pm
by JimC
Test fit on the winch bumperettes.
Studio_20251019_144519 (1).jpg
Studio_20251019_144519 (1).jpg (62.55 KiB) Viewed 103 times

Re: Front Bumper

Posted: Fri Oct 24, 2025 10:15 am
by Cal_Gary
Looking good Jim!

Gary