Hemi M37

[Ross11972]

I thought I would share my project with the community. It's been a long process so far but I'm very happy.

To start I bought a pretty rough M37. It did have a winch and hardtop but the motor was seized and it had rats nests all over.

https://imgur.com/QIF8Rbm

https://imgur.com/Pz1FnxO

https://imgur.com/Y0WdB4X

[Ross11972]

Next I hunted down a good donor chassis. I ended up finding a 2004 3/4 ton 4x4 hemi truck with a blown motor and bad transmission.


https://imgur.com/qUk5rAg

https://imgur.com/GRe0F0Z

[Cal_Gary]

That should be most interesting! There's a guy on YouTube doing the same conversion.
Thanks for the photos!
Gary

[Ross11972]

Next up was disassembly and mock up.

https://imgur.com/FjcD9WT

https://imgur.com/cSXeZRh

Mock up

https://imgur.com/627fvmD

A little long
https://imgur.com/eublXI5

Much better
https://imgur.com/B90gUXV

Removed two feet from the frame
https://imgur.com/kkY5z7f

[sturmtyger380]

It should be a good driver when you get done. Will you connect up the winch?

[Ross11972]

Unfortunately, the winch won't make it. I sold the entire original chassis to another member here.

More shots of the 2004 Dodge chassis that has been shortened
https://imgur.com/LsM5lTM
https://imgur.com/mrt24Ea
https://imgur.com/sZ3wKW9

Transmission rebuild time
https://imgur.com/0UvOObB

Cab body work begins. So much rust and random holes
https://imgur.com/ZF4KDUz
https://imgur.com/qxU7UIj
https://imgur.com/qt7fG3M
https://imgur.com/2Zt1lqn

[Ross11972]

More rust repair on the cab. Time was also spent filling various holes and mounts I wouldn't need anymore.

https://imgur.com/8NqMZmF

The front cowl vent was rusted pretty bad and beyond my abilities to fix so I filled it in. This will also give room for future heat and air conditioning(maybe).
https://imgur.com/8s2RiDY
https://imgur.com/Xzgoe61
https://imgur.com/GaJutNv

I finished up repair on the cab bottom so I could get it undercoated and back on the chassis.
https://imgur.com/1GFn1NJ
https://imgur.com/2FgkHFL
https://imgur.com/gUbnzO0

[Ross11972]

Cab mounted on custom mounts. I did end up cutting and moving the in cab bolt locations.
https://imgur.com/VlRfcUG
https://imgur.com/hqsDfL8
https://imgur.com/1Q4Yc4e
https://imgur.com/vl6goEV

Next, I modified the transmission hump to make it look a little more uniform and fit the new shifter.
https://imgur.com/D0HYQGK
https://imgur.com/ILKnxLL
https://imgur.com/JeUQ4sp
https://imgur.com/kOcimS2

[Cal_Gary]

Wow, moving right along Ross-thanks for the pictures and the updates!
Gary