Got some work done while off...

Talk about your truck here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
Cal_Gary
Moderator
Moderator
Posts: 4241
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Got some work done while off...

Post by Cal_Gary »

Hi All,
Decided to get some truck stuff done while I had the time available and before the summer heat kicked in:
Timing chain before.JPG
Timing chain before.JPG (63.53 KiB) Viewed 988 times
timing chain after.JPG
timing chain after.JPG (65.8 KiB) Viewed 988 times
Also replaced the water pump but have no picture with it included.
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
Cal_Gary
Moderator
Moderator
Posts: 4241
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Got some work done while off...

Post by Cal_Gary »

And:
bed bows assembled.JPG
bed bows assembled.JPG (45.94 KiB) Viewed 987 times
bed canvas installed.JPG
bed canvas installed.JPG (40.12 KiB) Viewed 987 times
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
Cal_Gary
Moderator
Moderator
Posts: 4241
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Got some work done while off...

Post by Cal_Gary »

And I did this for Armed Forces Day:
Armed Forces Day 2022.JPG
Armed Forces Day 2022.JPG (46.21 KiB) Viewed 986 times
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
Cal_Gary
Moderator
Moderator
Posts: 4241
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Got some work done while off...

Post by Cal_Gary »

And finally, spotted this
Great Falls Crash truck.JPG
Great Falls Crash truck.JPG (41.15 KiB) Viewed 986 times
up around the Great Falls area:

Enjoy....
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
RCrombie
CPL
CPL
Posts: 158
Joined: Tue Jun 20, 2017 2:02 pm
Location: Ottawa, Canada

Re: Got some work done while off...

Post by RCrombie »

Looks like time well spent! Truck sure looks good too. Did you get new canvas or did you just reinstall it for the summer?
The crash truck has some sort of heavily modified body doesn’t it? I wonder what it started out life as. The folding door is an interesting touch.
Cal_Gary
Moderator
Moderator
Posts: 4241
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Got some work done while off...

Post by Cal_Gary »

Thanks Rob,
Crazy busy for sure. Didn't get everything done that I wanted, but got some other stuff done that wasn't scheduled, like the bed bows and canvas. The canvas set and the wood bow kit I've had for years-just never found time to install them. Luckily, the bows clear my garage door by 2 inches-whew!

That modified crash truck was a stunner to see. Unfortunately it was on private property so I couldn't do a close examination.

The old timing chain had so much slop in both sides I'm surprised the engine still ran.

I still need to replace my exhaust and intake gaskets, rebuild my winch, and put a new shifter shaft in the PTO. Still need a new set of tires to mount on the combat rims waiting their turn too.
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
RCrombie
CPL
CPL
Posts: 158
Joined: Tue Jun 20, 2017 2:02 pm
Location: Ottawa, Canada

Re: Got some work done while off...

Post by RCrombie »

It’s also not the R2 variant so it is some sort of custom body. Someone put a lot of work into that!

Were you noticing any effects from the worn chain? Or just doing some preventative maintenance? I’m always amazed at these old trucks, how they can keep chugging along despite the wear and tear.
Halfdunn
PVT
PVT
Posts: 46
Joined: Thu May 17, 2018 1:37 pm
Location: Rincon, GA.

Re: Got some work done while off...

Post by Halfdunn »

The Red Crash Truck is actually a Marine Corp MB-2 Crash Truck and normally has a roof turret on top and were built in the mid 1950's.
7d4cec59c00a960c2715444b1fd79430.jpg
7d4cec59c00a960c2715444b1fd79430.jpg (44.23 KiB) Viewed 944 times
Halfdunn
PVT
PVT
Posts: 46
Joined: Thu May 17, 2018 1:37 pm
Location: Rincon, GA.

Re: Got some work done while off...

Post by Halfdunn »

Here is my 1953 USAF R-2 Rescue Truck.
278064067_4969912086426568_1864896565673234993_n.jpg
278064067_4969912086426568_1864896565673234993_n.jpg (120.14 KiB) Viewed 944 times
PoW
SSGT
SSGT
Posts: 489
Joined: Wed Nov 14, 2007 5:48 pm
Location: Hidden Valley, AZ

Re: Got some work done while off...

Post by PoW »

Those R2's are rare, and have a really extensive list of OBE.

Double glazing,even.

The data plate always cracked me up with "Truck, Forcible Entry..." :wink:

PoW
Murf
SSGT
SSGT
Posts: 278
Joined: Sun Nov 11, 2007 10:36 am

Re: Got some work done while off...

Post by Murf »

Looks good!
Today is my last day of work..
Time to get the garage cleaned out and find my truck under everything. Once I find it I can get back to work on it!
RCrombie
CPL
CPL
Posts: 158
Joined: Tue Jun 20, 2017 2:02 pm
Location: Ottawa, Canada

Re: Got some work done while off...

Post by RCrombie »

Halfdunn wrote: Tue Jun 21, 2022 8:23 pm The Red Crash Truck is actually a Marine Corp MB-2 Crash Truck and normally has a roof turret on top and were built in the mid 1950's.7d4cec59c00a960c2715444b1fd79430.jpg

Very cool, I didn’t know of that model! I thought there was only one version. I stand corrected.
Post Reply