what is it for ??

Talk about your truck here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
GERALDO
PFC
PFC
Posts: 85
Joined: Mon Mar 17, 2008 11:26 am
Location: N.C.

what is it for ??

Post by GERALDO »

If you look on the bed on the center metal uprights that the seat backs are bolted on about 4 inches up there are a welded nut with a bolt in it, yours may not have a bolt in it but there is hole in the stantion with a nut welded on the inside on each middle upright above the :?: rear fender, I have called all the experts on the m37 and no one can give me an answer, does anyone know?
52m37Hal
PFC
PFC
Posts: 65
Joined: Sat Oct 20, 2007 9:20 pm
Location: North Country, NY

Post by 52m37Hal »

Geraldo
Based on your description, I believe this is to secure the ridge pole when the canvas top to the bed is removed.
hal
GERALDO
PFC
PFC
Posts: 85
Joined: Mon Mar 17, 2008 11:26 am
Location: N.C.

what is it for?

Post by GERALDO »

Hal, you are the second one to tell me that, how is it secured ? and with the roof bows stowed behind the cab like they are supposed to be it looked like the ridge pole would not fit or line up , must have some type of off set bracket to raise it above the roof bows, need some more input, thanks Geraldo.
Post Reply