Cummins 4BT and M37/M42 Build with LOTS of parts (new, NOS)

Buy and sell M37 and related stuff

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Forum rules
Your Location must be included in your advertisement or it may removed without notice.
Post Reply
JGPierce
PVT
PVT
Posts: 39
Joined: Fri Oct 19, 2007 8:45 pm
Location: Seacoast, New Hampshire

Cummins 4BT and M37/M42 Build with LOTS of parts (new, NOS)

Post by JGPierce »

Howdy,

I've been planning to do this M37/M42 for years and have been collecting lots of parts, a lot are NOS and new, with some very hard to find kits/parts. I was planning to rebuild the truck with a Cummins power plant, like Paul Mierop's trucks, but my plans have changed and I would like to sell everything as a package.... at a bargain basement price of $6,000. The parts alone are worth 3X that amount if sold separately. I will also consider offers (no trades). Everything is to be sold together as I don't want to piecemeal it out.

What I've got is a disassembled 1952 M37/M42 Command Truck with a NH title. The frame has been media blasted, primed and painted. The leaf springs have been professionally increased in number to accommodate the Cummins. The rear axle has been centered. All have been media blasted, epoxy primed and painted chassis black. Everything is ready to be put back together. Everything has been stored inside. Lots of pictures are available upon request. I am in Southern New Hampshire (03885) on the Seacoast and 15 minutes from I-95. Now for the list of parts:

Engine:
-Cummins 4BT CPL 858, running.
-Cummins starter.
-Adapter for Cummins 4BT to NV4500 transmission.
-NP205 transfer case.

Parts:
-Complete set of manuals and other literature.
-Driver’s door and innards, NOS (1), in box
-Fording kit, NOS (1), in large box
-Personnel winter heater kit, NOS (1), in large box
-Disc brake Helitool kit, New (6 hub sets), in boxes
-Helitool power steering pump bracket/pulley kit, New (1) in box
-Helitool hanging pedals.
-Hydroboost brake kit, New
-Cargo box, rust free sides, Used (1)
-Cargo box bed and fuel opening cover from Midwest Military, New (1)
-Hood, Used (1)
-Fender skirts, Used, LH and RH
-Superwinch lock out hubs, 400508 (1 set), in box
-Lots of new seals and bearings.
-NOS spot light.
-Starter crank, in M37 cab, Used (1)
-Sealed long and thin black box, ? wiring harness, big, “Original MOPAR” logo, NOS
-Steering box with steering column, NOS (1)
-Tire chains, full set, aftermarket, New, in bag
-Inner tube 9.00x16, New (1)
-Brake hard lines pre-bent, full set, new reproduction (1)
-M37 fuel filter & hard line, Used (1)
-Cargo canvas end curtains, NOS (1) and Used (2)
-Rear bed fenders, NOS (2)
-Inner windshields Assembly, complete with glass and rubber and frames, New (2)
-Windshield frame, Used (2), each in box
-Exhaust manifold, NOS (2), both in box
-Original M42 command table (plywood wood table top has a break but all of the hardware is still there)
-Cargo bed top bows, full set with wood (still has the 3 holes drilled in the center support for the M42 pull down light (not included)
-Cargo bed metal bows (6), Used (1 set), in box
-Low Voltage test set, large grey metal box
-Headlight, 24V, 3 prong, NOS (4) and Sylvania Halogen, New (1), in box
-Generator, 100 Amp, Used (3)
-Engine generator regulator, 100 Amp (1 of every style made including the original carbon pile type), Used (2)
-Rectifier, 100 Amp, 28 Volt, 1of each kind (silicon and metallic), Used (2)
-Distributor, Used (1)
-Pioneer Rack with Shovel, Pickaxe, Axe, Used (1)
-Front fenders, rust free, Used (RH and LH)


Cardboard Box #1
-Emergency brake shoe with liner, New (1)
-Carburetor ETW1, Rebuilt June 2008, Used (1)
-Oil filter, NAPA Gold 1100, New (1)
-Brake cylinder, Used (4)
-Brakes and pads, NOS (4) and Used (2)
-Moteur essuie glace (windshield wiper motor) sealed in box, 259-999-141-52 then 3 or 8, NOS (1)


Cardboard Box #2
-Flange repair kit, 2530-734-2573, NOS (1 or 2)
-Channel assembly, 2510-737-4793, NOS (2)
-Weatherstrip, long, 2510-737-4826, NOS (2)
-Weatherstrip, long, 2510-737-4795, NOS (2)
-Clutch, original Mopar, 1268-714, NOS (1)
-Window regulator assembly, RH and LH, NOS (2) (? Third one in brown metal box #1)
-Slave cable kit, ?NATO jumper cable, 2540-00-953-0109, NOS (1)
-Wiring harness, 2590-040-1954, NOS (1)
-Weatherstrip, inner windshield U-shaped rubber, NOS (2)
-Armored waterproof 100amp generator and regulator cables, large diameter, Used (2)


Green Metal Ammunition Box
-Milspec wire stock, lots! NOS
-Douglas connectors, all parts, NOS
-Waterproof connectors, lots in bag
-Harness assembly, for what, NOS
-Points, New
-Ignition coils, New & Used (3)
-Ignition stuff in box
-Oil pressure sender, clamp, hard line, gauge, wiring, New & Used
-Fuel gauge, Used (1)
-100amp engine V-belts, NOS (2)
-G502.7342 385, (may be G502-75-42-385) kit, qty 4, Emb. Cemic, NOS (1)

Brown Metal Box #1
-Gas pedal, NOS
-Window crank handle, NOS
-Door handles, interior, NOS (2)
-Canvas tool roll with hand tools, screwdriver, wrench, pliers, NOS & Used
-Fire extinguisher bracket, original M37 take out, Used (1)
-Bolts for bed in Ziploc bag, Used
-Waterproof spark plug wire set, Used (6)
-Exhaust pipe tip, NOS (1)
-Spark plug wrench, New (1)
-RH door window regulator, 2540-741-0722, NOS (1)
-Choke cable, NOS (1)
-Brake flexible spring wound lines, full set 3 short (front) and 1 long (rear), New reproduction (2 sets)
-Brake flexible spring wound line, shorter, 2530-449-5530, NOS (1)
-Brake pedal extension spring, 2530-737-3782, NOS (1)
-Hood front secondary safety latch assembly, NOS (1)
-Tailgate chain canvas cover, New (1)
-Trico wiper motor, NOS
-Outside mirror arms, 2540009527034, DLA 700-84-M-LB05, NOS (2)
-Tire lug wrench, Used (1)
-Door handle escutcheons, inside, NOS (2)
-Wiper blades, NOS and Used (7)
-Tailgate broad canvas strap, New (1)
-Hub socket wrench, 2 9/16”, large, 5120-00-422-8972, NOS (1)
-Door seal, 2510-737-5407, NOS (4)
-Windshield seal, 2540-00-622-4722, NOS (1)
-Windshield rubber weatherstrip, large, NOS (1)
-Radio power wiring harness, large diameter to go to bed, 2590-00-314-0731, NOS (1)

Brown Metal Box #2
-Universal Joint Repair Kit, 947556, NOS (1)
-Universal Joint, 947553, NOS (1)
-Universal Joint
-Throw out bearing, NOS
-Carburetor gasket set, G502-7001066, New (1)
-Carburetor repair kit
-Draft pedal pads, 2540-00-770-6205, NOS (2)
-Draft pedal pads, pair of others, and third single different type, NOS (3)
-Starter pedal rubber cap, NOS (1)
-Fuel pump heat shield, Used (1)
-Electronic ignition, 24 Volt, from M-Series Rebuild, New (1)
-Yellow bridge marker plate, Used (1)
-Shaft assembly, 2530-00-737-3786, NOS (1)
-Battery top clamp, Used (1)
-Signal-Stat 600 Sigaide, early style turn signal kit with electronic box, NOS (1)
-Steering arm assembly, 2530-737-4765, NOS (1)
-Oil pump, 2805-734-6936, NOS (1)
-2520-700-1063, kit, NOS (1)
Includes:
Block 2530-734-2417 (1)
Gear 2520-741-1919 (2)
Pin 5315-014-1211 (3)
Pin 5315-014-4563 (3)
Pinion 2520-741-1947 (4)
Shaft 2530-734-9237 (1)
Shaft 2520-734-2576 (2)
Washers (6)
-Engine primer kit, G-249-5701814, NOS (1)
-Exhaust manifold gasket x 3, New (2 sets)
-Puller bolts and nuts, New (4)
-Screws for body and fuel, NOS (20)
-Axle hub studs (not wheel lugs), New (24)
-M37 R axle end, NOS (1)
-Metal motor of some sort, Used (1)
-WH Coupling, 4730-036-4421 (3)
-Fuel pump rebuild kit, NOS (1)
-Horn wire, NOS (1)
-Transfer case seal (6) and gasket (1) set, New and NOS (1 set)
-Master cylinder repair kit, NOS (1)
-Wheel cylinder repair kit, NOS (4)
-Rear axle vent, NOS (8)
-Rear engine mount cushion, G741-7373655, NOS (2)
-Horn button repair kit, 2590-606-8503, NOS (2)
-Hood support bumpers, NOS (2)
-Brake shoe return springs x 4, NOS
-Door check metal stopper with rubber cup, NOS (1)
52 M-42
SFC
SFC
Posts: 741
Joined: Fri Feb 03, 2012 12:56 pm

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by 52 M-42 »

PM sent.
002
PVT
PVT
Posts: 30
Joined: Wed Nov 06, 2013 2:01 pm

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by 002 »

I sure hope someone else has bought this. It is way to far from me. But that seems like a great price for such a large collection. You could drive from anywhere in the US pick it up and be home before you could order even half of it, even if you could find it.
User avatar
xm708
SSGT
SSGT
Posts: 495
Joined: Sat Oct 20, 2007 6:24 am
Location: vermont

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by xm708 »

I think a few people are in the process of trying...
User avatar
xm708
SSGT
SSGT
Posts: 495
Joined: Sat Oct 20, 2007 6:24 am
Location: vermont

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by xm708 »

Parts have been sold Thanks John ..
User avatar
milstencil
CPL
CPL
Posts: 168
Joined: Fri Apr 04, 2008 1:44 pm
Location: Snowy MA
Contact:

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by milstencil »

Does that mean WE have some for sale :?: :?: :?: :!:
Do you ship to NC :D :!:
Rick
Resident of the Communist state of Massachusetts, home of failed
health care and failed gun control! See what the Democrats can do
when they control both houses.
http://www.militarystencils.com
User avatar
xm708
SSGT
SSGT
Posts: 495
Joined: Sat Oct 20, 2007 6:24 am
Location: vermont

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by xm708 »

Mr.Larson

Of course WE ship to NC. Now if somebody didn't leave the snow belt you could come get them and save the shipping ? I understand if I could I would be right there down south with you guys....
User avatar
milstencil
CPL
CPL
Posts: 168
Joined: Fri Apr 04, 2008 1:44 pm
Location: Snowy MA
Contact:

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by milstencil »

Good morning Ed!!
32 here this morning and yesterday didn't get over 38
think it was was warmer at home
Headed home tomorrow and will email then.
Rick
Resident of the Communist state of Massachusetts, home of failed
health care and failed gun control! See what the Democrats can do
when they control both houses.
http://www.militarystencils.com
User avatar
xm708
SSGT
SSGT
Posts: 495
Joined: Sat Oct 20, 2007 6:24 am
Location: vermont

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by xm708 »

roger rabbit
Paul (in NH)
PFC
PFC
Posts: 82
Joined: Sat Oct 20, 2007 6:15 am
Location: New Hampshire

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by Paul (in NH) »

I take it you bought the stuff Ed? :)
002
PVT
PVT
Posts: 30
Joined: Wed Nov 06, 2013 2:01 pm

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by 002 »

Congrats Ed. Let us know when the parts are settled in and available piecemeal I have a few needs.
User avatar
xm708
SSGT
SSGT
Posts: 495
Joined: Sat Oct 20, 2007 6:24 am
Location: vermont

Re: Cummins 4BT and M37/M42 Build with LOTS of parts (new, N

Post by xm708 »

Morning guys sorry guys internet took a siesta last night THANKS FAIRPOINT you Su$%!! anyways yes in process of buying Johns project and parts not everything will be for sale but email your needs . I should be done hopefully purchasing and hauling parts by the end of the week.

ed
Post Reply