Wanted: Cargo box parts

Whirlinsun · Post by **Whirlinsun** » Tue Sep 13, 2011 10:23 pm

Hello all, I just got myself a '51 M37 and spent last weekend taking it apart to see what's no good or missing. The cargo box is off and apart now, so here goes:

I am looking for a rear cargo box crossmember,

A set of tailgate brackets (mine are booger-welded on),

Toolbox pan and doors,

Any help would be greatly appreciated. Thank you!

xm708 · Post by **xm708** » Wed Sep 14, 2011 5:38 am

I pm'd you back the other day and I have 2 beds available . I am up in north east VT a bit of a hike for you but worth every dime..

ed

Whirlinsun · Post by **Whirlinsun** » Wed Sep 14, 2011 6:50 am

xm708 wrote:I pm'd you back the other day and I have 2 beds available . I am up in north east VT a bit of a hike for you but worth every dime..

ed

Oh, thanks. I got it. I'll be PM-ing you back shortly.

My biggest problem right now is that my only pickup truck is the very one in 300 pieces; the m37. It definitely would make a ton of sense for me to just replace the bed and then sell this one or part it out. But until I have a truck, I am relegated to items the fedex man can lift. I'm looking for someone parting out a bed, really. Or someone who has accumulated spare parts and can sell me some.

xm708 · Post by **xm708** » Wed Sep 14, 2011 8:00 am

sounds good. If you find a means of coming up let me know..

WarrenD · Post by **WarrenD** » Wed Sep 14, 2011 10:38 am

Often times members of the local MV club can help you fetch things (assuming you're a member!!). You may have to pay for gas and some extras, but it is an alternative.
I just recovered my M37 last week that way, threw some money to a guy in the club and viola, a diesel pickup with trailer appeared!

Rick C · Post by **Rick C** » Wed Sep 14, 2011 12:19 pm

Might have a good set of doors out in the barn....

Post by **Cal_Gary** » Thu Sep 15, 2011 4:18 am

A fully assembled M37 bed will fit in a Mini-Winnie from U-Haul as well....
Gary

P.S. This did NOT have the fenders attached.

retiredguy · Post by **retiredguy** » Tue Sep 20, 2011 10:42 pm

I have a set of tool doors in good condition. I can send pics if interested.

Oddball-CmK · Post by **Oddball-CmK** » Sun Sep 25, 2011 4:18 pm

I believe I have the tailgate brackets you need, I'll send pics tomorrow if you're interested...

Cordell

Whirlinsun · Post by **Whirlinsun** » Mon Sep 26, 2011 1:00 pm

Oddball-CmK wrote:I believe I have the tailgate brackets you need, I'll send pics tomorrow if you're interested...

Cordell

Yes, I am interested. I'm starting on the cargo box soon. They'd be a great help. Thank you!

Oddball-CmK · Post by **Oddball-CmK** » Mon Sep 26, 2011 1:51 pm

Whirlinsun wrote:
Oddball-CmK wrote:I believe I have the tailgate brackets you need, I'll send pics tomorrow if you're interested...

Cordell
Yes, I am interested. I'm starting on the cargo box soon. They'd be a great help. Thank you!

Here are the photos of the brackets I have (Hope they're the ones you're looking for). They're take off, if they're better than yours and you're still interested, let me know...

Whirlinsun · Post by **Whirlinsun** » Mon Sep 26, 2011 6:07 pm

Well, I'm replacing these:

So yeah, I'd say they are better than the ones I have.

Mine are welded on and I won't even be cutting them off when I remove the spot welds are replace the vertical box tube on the back of the cargo box.

Please PM me and let me know how much you are asking for them.

-Mike

Wanted: Cargo box parts

Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts

Re: Wanted: Cargo box parts