Hi folks,
I read through a few threads about these plugs but couldn't find any specific references to sealants used.
I am replacing the 6 plugs on the T98 access ports.
I've used Permatex Aircraft sealant for most gaskets during the rebuild.
However I am wondering what folks have used for these plugs ?
Thanks
Sealant used for expansion plugs
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Re: Sealant used for expansion plugs
That same sealant will work just fine. Permatex #2 would be my other choice.
1953 M37
1964 M151A1
1967 M416
1984 M1008
4/1952 M100
12/1952 M100 gone
1964 M151A1
1967 M416
1984 M1008
4/1952 M100
12/1952 M100 gone
-
- 1SG
- Posts: 2832
- Joined: Sat Oct 20, 2007 4:35 am
- Location: Norwood, NC
- Contact:
Re: Sealant used for expansion plugs
We have used copper infused silicone in expansion plug bores for years, never had a single issue, so I feel that is a good choice.LegionPiper wrote:Hi folks,
I read through a few threads about these plugs but couldn't find any specific references to sealants used.
I am replacing the 6 plugs on the T98 access ports.
I've used Permatex Aircraft sealant for most gaskets during the rebuild.
However I am wondering what folks have used for these plugs ?
Thanks
Charles Talbert
www.mseriesrebuild.com
www.mseriesrebuild.com
-
- PFC
- Posts: 99
- Joined: Wed Sep 30, 2015 5:24 pm
Re: Sealant used for expansion plugs
Wow !
Very interesting choices !
Thanks for the suggestions gents.
Very interesting choices !
Thanks for the suggestions gents.