temp. sender

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
vinnytruck
SGT
SGT
Posts: 177
Joined: Sun Nov 27, 2011 8:46 am
Location: NEW JERSEY, USA

temp. sender

Post by vinnytruck »

Hi Guys, does anyone know the size of the hole and what thread size for the 1953M (I believe its a 230) temp. sending unit?
vinnytruck
vargaspj
PFC
PFC
Posts: 76
Joined: Mon Nov 15, 2010 8:39 am
Location: Ramona, CA 92065

Re: temp. sender

Post by vargaspj »

NSN 6685-00-814-5271
Transmitter, Temperature, Electrical, Resistance
Military Specification MS24537-1
TM 9-2320-212-20P
Figure 33.1 Item No 6
Technical characteristics
Thread length 0.766 inches nominal
Overall length 2.656 inches maximum
Outside diameter 0.375 inches maximum
Operating Temp Range +48.9/+160.0 degrees Celsius
Mounting facility screw thread series designator UNS
Unit type Protective tube
Mounting facility type and quantity 1 thread
Mounting thread quantity 14 per inch
Mounting facility nominal screw thread diameter 0.500 inches
Distance across wrenching surface flats 0.938 inches nominal
Accomodated contact type and quantity 1 male snap-on
Material Steel corrosion resisting overall
Style designator Transmitter, 24 VDC
Terminal type and quantity 1 threaded stud
vinnytruck
SGT
SGT
Posts: 177
Joined: Sun Nov 27, 2011 8:46 am
Location: NEW JERSEY, USA

Re: temp. sender

Post by vinnytruck »

thanks Vargaspj, I will get on it this weekend.VT
vinnytruck
Post Reply