I can't get in for squat.
Tried the info in the first email.
Then tried the new info I used after successfully signing in with
the info in the email, can't get in.
Tried to register and it told me my email was already in use.
??????????????????????????????????
Rick

Got an email this morning stating that I was registered for the gallery with pass word.
Still can't access the gallery - access denied.
Has a new password.
does this mean all my pix in the gallery are gone???
Rick

The "62" version was used up until 1972 when it was replaced with this one:

Notice it says older version will be used until stocks are depleted.
The white ones were used on armored vehicles.

Here ya go:

Rick

Weebee webbing: http://www.odcloth.com
The best around!
Rick

I replaced the composite lights that replaced the original lights with the newer LED lights. https://www.militarystencils.com/Assets/Rickspix/Taillights_002.jpg?ts=025313 https://www.militarystencils.com/Assets/Rickspix/Taillights_001.jpg?ts=025537 Makes a big difference at night. Pictures show tail...

Hooked'em up to the last plug on the manifold for vacuum.
Rick

Did you know that if you took the Douglas cap and put it on the Packard you can still twist lock them!
Packard acts like the plastic insert in the Douglas connector.
Rick

First you have to mount the pump as close to the tank as possible. These pumps are "pushers" not "suckers". Meaning they do better pushing the fuel to the carb rather than pulling to the carb. You need to tap off the ignition switch with one of these: FEMALE PACKARD "Y"...

My pump is located just in front of the fuel tank and the only time
I can hear it is when I turn on the ignition to start the engine.
Rick, how can you hear that pump when the gen set is running???
I don't operate my MEP-003A without muffs because of the exhaust and engine noise.
Rick

They have 1/8" and 1/4" fitting pumps https://www.aircraftspruce.com/catalog/ ... oldflo.php
Hit the spec section. The first 24V one listed is 1/8", second 24V is 1/4"

I've been using a Facet pump for the last 10 years. They are bullet proof!
Check here for the best price https://www.aircraftspruce.com/catalog/ ... oldflo.php
Aircraft stuff has to be good.
Rick

Adirondack Dodge parts

NV,
Email me at rickatmilitarystencilsdotcom and I will email pix.
I have a couple but they are for 250 rnds.
Regards,
Rick