It's a T137 Dodge 230 L6 engine as Bob suggested used in the Power Wagon. MOWAG T1 4x4 GW3500 Vehicle type: Light military terrain vehicle Year of manufacture Vehicle: 1953-1962 Year: 1953-1962 Country of origin: Switzerland Motors / driving performance Engines Years Cyl./Vent. Verd. Bore x stroke D...

06boblee wrote:Should you paint the inside of the steering knuckle? If so, what kind of paint?

You can, but not necessary.

If you do you need to use Glyptol paint .

That's the Red coating used in gear boxes etc.

Tom

Nice looking Trucks!
Welcome
Tom

I have no trouble shifting any of my transmissions.

Sounds like you need more practice.

There's no reason to grind any gear, unless clutch, or trans.
Needs work.
Tom

I'm with Paul. Rear diff is in upside down. Yes it will fit.
Tom

This is what I have on file all Standard Motor Parts (SMP)
Don't know how current the numbers are.

Points SMP# AL-4556XP GAP=.020

Condenser SMP# AL-118X

Rotor SMP# AL-150

Spark Plugs Autolite# 295

Coil, Cap, Wires from MV part suppliers only.
Tom

Merry Christmas to You And Your Family Carl.

Love the Card!
TGP

If you can close the heat riser I would do so, or just a little will work. But most of the time there froze and won't move. 99% sure your problem is a dripping carb(flooding) and needs a rebuild, Or very least the float level checked. Vapor lock condition wouldn't start until after it cools down, no...

I think I would find another unit, weld and regrind the parts if unattainable.

Charles and Frank are Spot on.

Just to much heat is these gear boxes for a bushing to survive very long.
Tom

Posting your location would help in selling the axle.
Glad you got it going again.
TGP

My fear is that the backlash is due to worn gears! We'll soon see. I'll have to post a photo of the hole in the floor made by the rear driveshaft at some point. I'm sure it was rather exciting when it entered the cab :shock: ! I doubt you'll find any gear problems. Most likely the bearings have wor...

Hey John,
You should really watch the company you keep!

That's a great group of friends there.
Dave sent me a copy of that picture right before Wayne posted
It on DPW.com.

Other than the rain looked like a Great Day!

Tom,(TGP)

I bought new flaps and tubes a couple of years ago from one of the bigger dodge sites. Not sure if it was VPW or MWM. Possibly another. Anyway, I have gotten around to stripping and painting my rims this month, and when installing the new tubes, they have a marking on them saying for radial tires. ...

My M37 had a decal center of dash below windshield "Max Speed 45MPH"

Have also seen it in stencil.
Tom

The frame extension bolt to the frame.
The Winch bolts to the extensions with a left and right "L" bracket at the
Ends of the winch,
Tom