Search found 1198 matches
- Wed Jun 21, 2023 1:02 pm
- Forum: Technical group
- Topic: M37 Horn Button
- Replies: 6
- Views: 2870
Re: M37 Horn Button
I had to perform surgery on an aftermarket one. It had the problem you have. Then I found a new old stock one from that fellow in Texas. It worked fine but the rubber button was short lived.
- Sat Jun 03, 2023 2:57 pm
- Forum: Technical group
- Topic: Original Brake Lines With Funk ??
- Replies: 9
- Views: 2478
Re: Original Brake Lines With Funk ??
Brakes are overrated and only marginally necessary.
But if you don't agree, you should probably replace all the lines.
But if you don't agree, you should probably replace all the lines.
- Sat Jun 03, 2023 6:28 am
- Forum: General M37
- Topic: Crush Washers for F&R Axles
- Replies: 6
- Views: 2512
Re: Crush Washers for F&R Axles, Transmission, Transfer Case
My Ace Hardware has them. Any auto supply will have them. I anneal them at each oil change until they are too deformed. Then use a new one.
- Thu Jun 01, 2023 1:25 pm
- Forum: General M37
- Topic: Leaking antifreeze
- Replies: 4
- Views: 1028
Re: Leaking antifreeze
Tighten all the hose clamps first. That's the usual culprit.
If it still leaks, then clean it thoroughly and dry it.
Spray it with a talc powder
The leak will be obvious very quickly.
(Head bolts, t-stat, bypass housing, water pump, etc.)
If it still leaks, then clean it thoroughly and dry it.
Spray it with a talc powder
The leak will be obvious very quickly.
(Head bolts, t-stat, bypass housing, water pump, etc.)
- Mon May 29, 2023 11:20 am
- Forum: General M37
- Topic: HAPPY MEMORIAL DAY !!
- Replies: 4
- Views: 1649
Re: HAPPY MEMORIAL DAY !!
Happy isn't the term for today.
The size limitations prevent any pictures from today's observation of General Order 11. We had 20+ vehicles from MB's to Hemtt's. Even a Gamma Goat.
The size limitations prevent any pictures from today's observation of General Order 11. We had 20+ vehicles from MB's to Hemtt's. Even a Gamma Goat.
- Wed May 24, 2023 1:40 pm
- Forum: Technical group
- Topic: AB15 Antenna with CB Radio
- Replies: 5
- Views: 1919
Re: AB15 Antenna with CB Radio
It will actually need to be longer. Not shorter. The AB-15 as used in our trucks is 6m or 50Mhz. CB is 11m or 27Mhz. A 1/4 wave for CB is 102" long. In general, you will need to be resonant in order to appear as a 50ohm impedence to your radio and keep your VSWR below 2.5:1. You can run just ab...
- Tue May 23, 2023 2:06 pm
- Forum: General M37
- Topic: Trailering with Uhaul
- Replies: 12
- Views: 2063
Re: Trailering with Uhaul
7500 GVWR is not enough. You will be on the ragged edge. (The weight of the trailer has to be added to the truck weight.) I reengineered my trailer to 12,000 GVWR to have the cushion. The trailer running gear was really straining until I upped the wheels, axles, springs and coupler. And redoing it w...
- Tue May 23, 2023 1:59 pm
- Forum: Technical group
- Topic: Gear Oil Specs
- Replies: 6
- Views: 1349
Re: Gear Oil Specs
If it contains yellow metal do not use GL5. Or any extreme pressure lubricant. They contain additives that destroy the yellow metal.
I have no trouble buying GL0. And GL4 isn't hard but you will have to order it.
I have no trouble buying GL0. And GL4 isn't hard but you will have to order it.
- Sun May 14, 2023 12:12 pm
- Forum: Technical group
- Topic: Oil pump leak
- Replies: 13
- Views: 4045
Re: Oil pump leak
The two surfaces must've been pretty darned flat for it to seal!
- Thu May 11, 2023 3:07 pm
- Forum: Technical group
- Topic: CB External Speaker
- Replies: 5
- Views: 1406
Re: CB External Speaker
They need to be impedence matched. I typically unwire the coil and passive volume control and go direct to the speaker.
- Wed May 10, 2023 5:47 pm
- Forum: Technical group
- Topic: CB External Speaker
- Replies: 5
- Views: 1406
Re: CB External Speaker
The Motorola speaker they used in police cars works great. I've picked them up at hamfests and ebay and use them on all my ham radios.
Also, the military speaker can be made to work well. And it looks the part.
Also, the military speaker can be made to work well. And it looks the part.
- Mon May 08, 2023 5:38 pm
- Forum: Technical group
- Topic: 24 Volt Military Coil Modification
- Replies: 28
- Views: 6291
Re: 24 Volt Military Coil Modification
They don't. I called a few weeks ago.
- Mon May 08, 2023 3:40 pm
- Forum: Technical group
- Topic: 24 Volt Military Coil Modification
- Replies: 28
- Views: 6291
Re: 24 Volt Military Coil Modification
24 volt coils are tougher in the US. In Europe they are common.
I've got a couple I picked up from a marine supply. Some boats are 24v.
I've got a couple I picked up from a marine supply. Some boats are 24v.
- Sat May 06, 2023 10:56 am
- Forum: Technical group
- Topic: Valve Seat Angles
- Replies: 11
- Views: 3224
Re: Valve Seat Angles
The Ruby stones are the best. But try and find them now!
- Thu May 04, 2023 4:37 am
- Forum: Technical group
- Topic: Valve Seat Angles
- Replies: 11
- Views: 3224
Re: Valve Seat Angles
I don't rev fast enough or have enough carb to even think about needing to port or polish. The rough surfaces keep up turbulence and help keep the fuel atomized and entrained in the air.
And the flow in a flathead is a joke at best. There was a reason for the compromise of the F head in Jeep
And the flow in a flathead is a joke at best. There was a reason for the compromise of the F head in Jeep