The vacuum advance timing thing does not hold any vacuum at all
AND i had a leaky hose
Replacing both parts tomorrow.

Wow
Thanks!

toss the factory felts. on one truck im running teflon sliders, counter sunk screws bolted in the stock holders. window is tight, no flopping when up and very easy to roll up and down. this mod was done after replacing the felts and making the mistake of waxing the frame for ease of use...wax + fel...

The round snap on clips that hold the regulator to the window glass are available at ace hardware

When I first got the ambulance.
One hub was super easy to turn and the other had normal resistance.
The sloppy one is the one that died

Teflon is a good idea.
I will see what i can find

I went with number 1
Going to have to carry a tarp everywhere i go and remove all tools etc
And dress in my heaviest clothing to go anywhere
This thing is my daily driver

No paint Absolutely smooth operation until the window is in it. Then so tight it just dismantled itself. By ripping the metal frame off the glass All adjustment screws have been tight loose and everything in between . It looks like my options are 1 remove glass and cover with plastic ( that way i ca...

I found the section of the manual that shows how to adjust the windows m43b1.
Going to giver er the ole college try once again
This has been an ongoing pain in the ass
Is there a trick to get them just right so they will go up and down easily.
I replaced the channel lining and those windows wont move

Early turn signal blinker box
Not tested
$50 plus shipping from 57701

There are more and the clips in the shed.
Have to dig the door out of the snow

.........

Half price sale
$50

150 on four cylinders
160 on two

It's 1f no wind today.
Go warm it up and compression test
Fingers crossed