Search found 1840 matches
- Sat Feb 11, 2017 9:10 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Hi Bruce, I wanted to take some shots but it was late afternoon and the light was wrong. Next time will try on the morning when the sun shines into the bay. I have ordered some solid film lubricant and will do the lift chain and the telescoping arms and that should make lift arm adjustments easier.
- Fri Feb 10, 2017 6:52 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Had a chance to try out the lift using my Chevy Silverado. Swing arms were hard to move due to accumulated dirt and lack of lube but after placing them under the frame and pushing the button switch it raised to full height with no problem and with almost no change in motor/pump sound between no load...
- Mon Feb 06, 2017 2:29 pm
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Will do Bruce, I always take care of her since she is my best friend, partner and lover, I have also learned the always correct answer to her is "Yes dear."
- Mon Feb 06, 2017 8:10 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Glad you do not hate my luck Bruce, I was fortunate the friend of mine that manages the garage remembered I was interested in buying their unit when they decided to upgrade to a lift of far greater capacity.m-37Bruce wrote:I don't hate, I am just really jealous. BTW Nice catch!
- Mon Feb 06, 2017 8:00 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Andy, thanks for the link...very informative. The concrete floor it is now attached to is a 6+ inch thick 5000 psi one and was spec'd out by me for the purpose of adding a future lift. The lift is anchored to the floor by sixteen 6" long x 3/4 dia. Red Heads torqued to 250ft.lbs. each. My buddy...
- Sat Feb 04, 2017 8:58 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Elwood, raising the roof as a unit would be difficult but removing the roofing, sheathing and doing all other work associated with increasing the head room would not be any easier and you'd spend a lot of time doing it.
- Sat Feb 04, 2017 8:10 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
Installed here in my shop on Monday and tomorrow the Electrician will be here to power it up, $500 for the lift and another $500 for the move and install.
- Mon Jan 16, 2017 6:54 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Re: Vehicle Lift
I would have preferred 4 posts however this one is still in service so it operates well, also at that price it can't be turned down. a pro. installed this one and I plan to hire them for removal and set-up. Height is not a problem except the M will not be able to go full height because of the cargo ...
- Sun Jan 15, 2017 1:41 pm
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
- Sun Jan 15, 2017 10:24 am
- Forum: General M37
- Topic: Leaking Oil Pan Gasket Replaced.
- Replies: 51
- Views: 7413
Re: Leaking Oil Pan Gasket Replaced.
I have installed many pans since my first truck needed one in 1972. It is harder to do as the alignment is not easy without trimming the ends but that's not the way army mechanics were supposed to do it, only by the manual. To maintain pan/block hole alignment I made 4 guide pins from bolts with the...
- Sun Jan 15, 2017 9:58 am
- Forum: Soap box
- Topic: Vehicle Lift
- Replies: 32
- Views: 5274
Vehicle Lift
I received a phone call from a friend who manages a local garage where I have been dealing for more than 40 years and was asked if I was interested in buying the lift that was going to be removed and a heaver duty one installed. This one is supposed to be a 5 ton lift and they were asking $500. I wo...
- Sat Dec 24, 2016 9:29 am
- Forum: Soap box
- Topic: Happy Holidays!
- Replies: 2
- Views: 822
Re: Happy Holidays!
Merry Christmas everyone and hope all have a wonderful holiday season.
- Fri Dec 23, 2016 8:57 am
- Forum: Technical group
- Topic: !?$!?$?! Vibration!
- Replies: 75
- Views: 8845
Re: !?$!?$?! Vibration!
Several loose floor pan bolts resulted in a buzzing sound in one of my first M37s.
- Mon Dec 19, 2016 8:12 am
- Forum: General M37
- Topic: Merry Christmas!
- Replies: 13
- Views: 1924
Re: Merry Christmas!
Thank you and Merry Christmas to you and Pam Carl.
- Sun Dec 04, 2016 7:43 am
- Forum: Test area
- Topic: Bridge Photo
- Replies: 8
- Views: 3517
Re: Bridge Photo
OUCH !