6BT is long, a 4BT fits, but you will have to modify the firewall to get a 6BT to fit.

All depends on how you use it. A Stock frame will crack under any engine when used for extreme off road when flexing.

Very well done.

Nice, but what's the coating on the Cooler?

superbee70, Nice work. I know based on your other post you expect the custom radiator to be setting against the grill, but curious what yout engine mounting locations is based on the attached photo? My '68 short snout water pump V-8 is mounted likly further rearward as I was able to only move the ra...

Yes. The passenger side block ears are cast I believe further forward on the 360 vs the 318.

You can check out my 318/NP435 install at: http://m37.wawii.com/

VPW now sells the mounts to do what I did.

Thanks. What is the black cylinder with the red sticker?

No bad at all, a nice lower profile assembly. Where did you find it?

Very Nice, look forward to more updates and pictures.

Thanks Andy, let us know what you end up with.

My Stock RZR was 50" wide, and with the Baja Bumpers it's 116" long. Since I have a tool box in the front of the M37, I modified a Steel 4-Wheeler Rack to go from bed side to bed side, and then other half in making two short ramps to go from then end of the bed up to the cross rack. http:/...

A Polaris RZR will (50" x 116") with he tailgate down, just barley.

I don't know the year range, but the Bronco tank I used in the PW was a MTS Plastic Bronco 33 gallon fuel tank (425C1) with an MTS Bronco Sending Unit (73E/10F).

Very nice!

I used a Bronco 33 gallon Poly tank on the PW. The tank is 15" tall, rather than the 12" of the stock tank but I was able to fit it nicely, just no potential of a rear PTO with it.

Thanks, Mine was the M37 broken Pitman Arm. Broke it the first day, and had if quickly fixed and enjoyed the rest of the week. I also had the Red Power Wagon with Stake Bed.