Sweet!!! Thank you gentlemen!!
I'll go head that way and see what I can dig up!

Have a nice day!

Howdy friends!! Just curious if there's any information concerning wire routing and the stuff required to mount a wiring harness?? (clips, hardware, sheet metal screws) My 1962 M37wow was used by the road commission as a asphalt truck. I'm guessing since they don't work at night, they made a crappy ...

Thanks Hal!! I actually ran into a pretty good deal on a brake like kit someone never used - been sitting around for a while but no worse for wear!! I just ordered new rubber body to axle lines, so when completed, everything will be new except for the brass fittings. Better safe than sorry!! Have a ...

Thanks Nam Vet. I was checking out the back brakes and discovered a crushed brake line, so I'll have to replace the lines anyway!
Just the way it goes.

Have a great day - and welcome home!!

Thanks everyone for your wisdom!! I did replace the front flex hoses, I'll do a little dissection on them and see what's in there. Also in the process of replacing all the wheel cylinders - Shouldn't be all that hard to take a line loose (most likely from the rear axle) and blow it out. That might p...

Howdy! Hope everyone is having a great early summer - based on the current weather, it's going to be a scorcher. Get underground!! So, I finally got a new master cylinder mounted, the front flex hoses and brake cylinders off and I noticed some funk in the brake lines. This vehicle sat for who knows ...

Yep!! I bought a bunch of stuff from Vintage Power Wagons and they just happen to have a master cylinder core with the fording valve still attached. BINGO!! Right place at the right time!!!

I looked them up and sent them a email.
Thanks for the suggestion!!

Thanks for the info!

Thanks PoW!! I’m having to beat, punch, drill out whatever to get them loose and would love to replace them with something better. Thank you for your offer!

mike_m wrote: ↑Sat Nov 12, 2022 7:34 pm U can get black oxide or maybe stainless allen head scews in the size u need from McMaster Carr. I have the black oxide ones.

Good luck

MikeM

Sweet!! Do you happen to know what the McMaster Carr part number??

I’ve pulled everything I could find off the internet, plus all the research used to re-create Malfunction - just trying to see if there’s anything else not yet scanned to the WWW. You just never know!!!

Has anyone found an easy substitution for the brake drum retaining screws? Everybody and their brother use these things - from car and trucks to Massey Fergusons to Ford 8Ns. There must be something out there that has the same specifications - and perhaps an allen-head or hex head !!!! Any wisdom wo...

Thank you for the advice!!

Have a nice day!!

Thanks Elwood! Since I wrote this post, I found a dude that has one - pretty darn quick!
I don't plan on water fording, but you never know!!

Have a good one!